a4ca0d30c3
Force the use of system's reset in openocd
...
Using the system's reset avoids the debug getting stuck when the chip
enters low power. Hopefully this works all the time
2024-08-04 20:14:34 +02:00
89c81b8c42
Integrate the RTC to the task module
2024-08-04 20:14:24 +02:00
24e412446d
Implement bkp's rtc alarm configuration
...
Since the alarm must be set each time it is to be used, a separated
function is a better fit
2024-08-04 20:12:28 +02:00
7ab6622908
Rework exti module to use a simpler API
...
The "specific" lines configuration would not work due to index error in
the callback configuration. While fixing the error, simplifying the API
by moving the afio calls to the calling context seemed a cleaner way to
do things
2024-08-04 19:38:24 +02:00
ba9bc57a49
Add openocd configuration
...
The target's debug would sometime get stuck while in low-power, making
it difficult to resume communications, even after hardware resets. Some
peripherals were also kept running when halted. This config should fix
these issues
2024-08-04 15:52:24 +02:00
947df53ecb
Add missing file documentation
2024-07-27 22:19:29 +02:00
80c027370b
Document BKP module
2024-07-27 22:13:46 +02:00
b1d25561b4
Temporarily fix warning
2024-07-27 21:57:53 +02:00
507f1e6863
Move rtc control to new BKP module
...
RCC's BCDR register has been moved to the BKP module since it is part of
the backup circuit and thus also aboeys some restrictions access-wise
2024-07-27 20:11:51 +02:00
3e3d4d2bff
Implement RTC module's basic functionnalities
...
FUnctions need a cleanup and some details need be ironned, like the
clock management since the whole backup domain must be reset to
configure them
2024-07-27 16:41:36 +02:00
b37eb1dd6e
Add RTC configuration to RCC module
2024-07-27 14:17:58 +02:00
0b483c535b
Ensure PWR is enabled before configuration
2024-07-27 14:15:55 +02:00
a02bcecaec
Implement RTC module's registers
2024-07-16 22:21:05 +02:00
699569ec99
Add LSI configuration function to RCC
2024-07-16 21:50:01 +02:00
3e97d4fe7e
Implement sleep modes
2024-07-14 19:17:20 +02:00
5c89df4324
Fix typo in PWR registers
2024-07-13 21:35:42 +02:00
1741d47546
Implement SCB module
2024-07-13 21:35:22 +02:00
97dad53621
Define SCB module's registers
2024-07-13 21:14:44 +02:00
9681755168
Define PWR module's registers
2024-07-13 13:19:17 +02:00
5e4d87474a
Fix major reg bitfield issue
...
A while back, macros had to be put in place to avoid letting the
compiler directly use the bitfields. This was necessary because the
compiler used strb instruction which only write bytes. On the AHB bus,
byte writes are transformed into word writes by repeating the byte,
which caused mayhem in the registers. After a lot of research, turns out
the packed attribute stops the compiler from does optimal (word) writes
and isn't needed anyway. Removing them fixes the issue
2024-07-10 23:16:49 +02:00
d5c70a3a04
Document the task module
2024-07-10 21:54:23 +02:00
93b383be49
Add API to access task's system time
2024-07-09 22:07:35 +02:00
dd1756221d
Fix typo in task macros
2024-07-09 21:46:15 +02:00
173e16eb2e
Add back task features in a simplified way
2024-07-09 11:53:05 +02:00
b7951f2211
Simplify task module
2024-07-06 22:43:50 +02:00
7cb33f65a5
Create new delay module
2024-05-14 15:03:18 +02:00
c09d2cda67
Remove priority parameter from tasks
...
In the end, priorities are only usefull in preemptive systems. Here, it would
only garentee the execution order, which we don't care about most of the time
2024-05-14 14:53:51 +02:00
34fb4dac76
Make stk_read function usable
...
This function used to return the raw current value, but that exposes the
prescaling used internaly
2024-04-30 20:17:58 +02:00
432310a52d
Implement task module
...
For now, most code is temporary to validate that the system can work as
envisionned. Optimisations and cleaning will be done shortly
2024-04-30 20:15:58 +02:00
7e69bfd89c
Document systick module
2024-04-28 22:11:37 +02:00
ddd05da6eb
Implement systick module
2024-04-28 22:04:10 +02:00
7ba9063d02
Define systick's registers
2024-04-28 19:43:37 +02:00
fb1c11132f
Write first API macros
2024-04-28 19:14:28 +02:00
Steins7
cbe6409f69
Merge pull request 'rework' ( #4 ) from rework into dev
...
Reviewed-on: https://git.steins7.ovh/Steins7/stm32f1xx_HBL/pulls/4
2024-04-20 18:20:22 +00:00
Steins7
64e1a0c83d
Merge pull request 'assert' ( #3 ) from assert into rework
...
Reviewed-on: https://git.steins7.ovh/Steins7/stm32f1xx_HBL/pulls/3
2024-04-20 13:47:12 +00:00
47a06a2a39
Add asserts in existing code
2024-04-20 15:45:51 +02:00
a20acf4031
Implement error header
2024-04-20 15:20:18 +02:00
Steins7
eb0ca60aa1
Merge pull request 'debug' ( #2 ) from debug into rework
...
Reviewed-on: https://git.steins7.ovh/Steins7/stm32f1xx_HBL/pulls/2
2024-04-20 11:15:31 +00:00
26f2b4d545
Document format module
2024-04-20 11:57:02 +02:00
12800818ce
Document debug module
2024-04-20 11:44:56 +02:00
84deb788a0
Improve debug module architecture
2024-04-20 11:37:11 +02:00
254fec4f00
Disable zero padding for signed integers
...
zero padding is mostly used with unsiged integers, and is quite difficult to
properly implement for signed integers. Disbaling iti n that case seems like a
good compromise
2024-04-15 23:10:31 +02:00
0088322ee7
Fix warning
2024-04-15 23:10:19 +02:00
e477055e6e
Implement right-justified padding
2024-04-15 22:56:49 +02:00
3bcb9c7df4
Add error handling
2024-04-15 17:17:23 +02:00
075d9e17a6
Changed internal functions to static
2024-04-15 17:17:05 +02:00
727aadaba9
Implement signed integer formating
2024-04-15 17:04:35 +02:00
3dc548332f
Implement basic string formatting
2024-04-15 16:54:54 +02:00
0d5deffa58
Update debug service to use new dma_mbuf
2024-04-07 16:47:34 +02:00
Steins7
c26b1cd703
Merge pull request 'usart' ( #1 ) from usart into rework
...
Reviewed-on: https://git.steins7.ovh/Steins7/stm32f1xx_HBL/pulls/1
2024-04-06 21:05:00 +00:00
